Rotary shot blasting machine - structural principle

The rotary shot blasting machine is mainly composed of a chamber body, a turntable, a transmission system, a separator, a hoist, a pelletizing device, a blasting machine, etc., and a high-speed rotating blasting machine at the top of the chamber performs the optimal orientation of the workpiece. The ejection, when the workpiece is transferred out of the chamber, the cleaning effect can be directly seen for the next step. The scraping plate is rotated by the transmission system, and the shot sand is sent to the lower part of the hoist through the flow pill tube, and then the separator is separated by the hoist, and the intact projectile is continuously used by the blasting machine through the pill tube and the gate, and the broken shot is broken. The projectiles and dust are separately fed into other corresponding pipes for secondary separation. The rotary blasting machine transmission mechanism drives the friction wheel by the cycloidal pinwheel reducer, and the friction mechanism is generated by a clutch mechanism and the turret to make the turret rotate smoothly. When the workpiece is turned out of the room, it can be used to directly flip the adjusted and cleaned workpieces; at any time, according to the difference of the workpiece to be cleaned and the difficulty of loading and unloading the workpiece, the clutch handle is pulled to disengage the friction wheel and the turntable, that is, the turntable Stop and adjust the workpiece and change the handle position. The turntable starts to rotate.

Rotary shot blasting machine - detail features

1. The interior of the main machine is made of wear-resistant alloy steel plate with high chromium content, good wear resistance and long service life.

2. There is a transmission device inside the main unit to drive the alloy disc in the main body to rotate slowly, so that the workpiece placed on the disc can be shot at a multi-angle angle of 180°, and the surface shot blasting is ensured.

3. The inside of the machine consists of 2 blasting machines distributed in different coordinates. The position and projection angle of the blasting machine are specially designed to minimize the dead angle of the workpiece inside the machine and shorten the time of shot blasting. Achieve high efficiency and high economics.

4. The shot blasting machine is all imported from Taiwan. It has the characteristics of large shot blasting, fast throwing speed, low noise, wide angle and high cleaning efficiency. The blades, control cages, distributors, large bends, small bends and other guards in the blasting machine are all made of high-chromium molybdenum alloy with a chromium content of up to 26.5-28%. They are made in Taiwan and have excellent casting techniques and lines. The contour is clear, the surface is free of air bubbles, and the appearance is exquisite.

5. Adopting advanced air-selective separator, the internal special structure makes the separation rate as high as 99%. At the same time, the pneumatic controller developed by our company is used to control the flow rate of the steel ball to ensure the uniform flow rate of the steel pill, avoiding burning the motor more, or The amount is less than the shot blasting effect.

5. Each key transmission part has an inductive proximity switch. It is detected whether the transmission part is working normally. If there is a fault, stop running immediately to prevent further problems.

6, using the new type of pulse-type dust collection, using the timing of high-pressure air-jet type blowing dust cloth pipe to automatically dust, better than the motor vibration dust. Dust bag and electromagnetic pulse valve are all made by Taiwan Powerful brand and quality assurance.

7. The electrical part adopts the Delta PLC control system. As long as one button is used, it is easy to operate. Each operation position is equipped with an emergency stop button to ensure the safety of personnel in the event of an emergency. At the same time, there are abnormalities in the relevant parts. The light alarm prompts, can determine the place where the problem occurs in the first time, and can quickly eliminate and restore the machine.

The conventional size of the turntable in the working box of this equipment has a diameter of 1300 and a diameter of 1500mm. The size can also be customized according to customer requirements, especially for precision casting valves, pipe fittings and other deep-hole objects.

Dongjiu Shot Blasting Machine Equipment--Industry Advantage

 1. High quality and high efficiency: The main components of the core are imported from Taiwan, high chromium and molybdenum alloy materials, and the chromium content is as high as 28%.

 2, super high cost performance: core design and operation is convenient, maintenance, repair is fast and simple, the biggest reduction in maintenance costs.

 3, long service life: vulnerable parts are 3-5 times the service life of domestic similar products.

Dongjiu Shot Blasting Machine Equipment--Service Advantage

 1. After-sales service guarantee: After receiving the after-sales service repair call, the after-sales service technicians respond within 15 minutes. For the confirmation of on-site maintenance, the Pearl River Delta region will be settled within 24 hours, and other provinces and cities will solve the problem within 48 hours. The fault is not ruled out and the maintenance site is not evacuated.

 2, equipment quality assurance: one year from the date of acceptance of the equipment is a free warranty service period, our company provides repair services for problems other than fragile accessories, after the expiration of the warranty period, provide lifelong and timely maintenance services, only charge for material costs.

 3. Establish a complete equipment file for the customer free of charge, and return to the company three times a year to understand the customer's usage.

 4, my company has a 24-hour after-sales service, Tel: 153-6264-7737 Mr. Zhong.